14 of 44
NAC-S20-15 Active Compensation Unit - User Manual – Ver. 1.0
3.2.
How to Access the Web Interface
Before the controller can be accessed through an internet browser by typing in the IP address of the
controller, the network settings may need to be configured. The following section explains how to
connect to the controller using a Windows 10 PC.
Note:
Default settings for the NAC-CTRL is having a static IP address of 192.168.1.100. Adding the
device to a network with an existing device having the same IP address can cause network faults. For
initial commissioning, connect the control unit directly to a PC via the Ethernet interface.
Step 1
Connect the controller's power supply and connect to a PC using an ethernet cable.
Step 2
Open Network & Internet settings by right-clicking on the Wi-Fi/LAN icon in the menu.
Figure 11
