10 of 44
NAC-S20-15 Active Compensation Unit - User Manual – Ver. 1.0
2.5.
NAC-CTRL Interfaces
NAC-CTRL Interface, Front
Figure 7
ID
Description
Functionality
A
Ethernet Connection
For connecting the controller to a PC.
B
Interface to NAC tool unit For connecting the controller to the NAC.
1
LED status indicator
Ready for operation indicator. Is turned “On” when the
NAC is ready for operation.
2
LED status indicator
Ethernet session indicator. The LED is only turned “On”
when there is a connection using the Ethernet TCP/IP
connection.
3
LED status indicator
System state indicator. The LED is “Off” when the system is
in idle state, “On” when system is in active force control
state. The LED is blinking when an error has occurred, and
the device is in error state.
4
LED status indicator
Power indicator. The LED is “On” when the NAC-CTRL is
powered on.
RES
Reset button
Hold to reset the controller to the default settings.
Table 5
A
B
1
2
3
4
RES