nord 6052902/0213, Manual With Installation Instructions

Page: 74 / 128

Industrial gear units – Manual with installation instructions
74 B 1050 en-3921
5 Service and maintenance
5.1 Inspection and maintenance intervals
Inspection and
maintenance intervals
Inspection and maintenance work
Information
see Section
According to
manufacturer's details • Option PT100: Check the function and measurement
accuracy; recalibrate as necessary
Manufacturer's
documentation
• Option LC/LCX: Check the function and measurement
accuracy of the pressure monitor, recalibrate as necessary
• Option CS1-X: Service the oil / water cooler
• Option CS2-X: Service the oil / air cooler
• Option DB: Replace drying agent filter
• Brakes: check for wear
• Couplings: Service the drive and output couplings
Standstill/storage
> 3 months • Regularly check the protective coating on unpainted and
painted surfaces
• Check the condition of the oil
• Check the seals
3.2.2
Daily • Visual inspection of the contamination indicator 5.2.8
• Check oil temperature 4.10
• Check oil pressure 4.5
• Check if the operating noise has changed 5.2.2
Every 100 operating hours,
but at least weekly • Visual inspection for leaks 5.2.1
• Check the gear unit for unusual running noises and
vibrations 5.2.2
• Option VL3/KL3: Check the oil leak indicator 5.2.5.5
After 500 operating hours • Check the brake
– Inspect the wear pattern of the brake
– Check the lining wear correction
3.25
• Check the coupling
– Check the gearing wear of the coupling
3.16, 3.17
At least once per month • Option FAN-A, FAN-R: Check the air cooler / gear unit for
dirt and dirt deposits 5.2.9
• Option CS2-X: Check the heat exchanger for dirt 5.2.9
• Check the covers and the attachment adapters for dirt and
dirt deposits 5.2.9
At least once within 3
months • Belt drive option:
– Inspect the pulleys and belts for wear and condition
(profile gauges)
– Check the belt tension
5.2.17