nord 6052902/0213, Manual With Installation Instructions

Page: 72 / 128

Industrial gear units – Manual with installation instructions
72 B 1050 en-3921
Information
Taconite seals have a grease filling to seal the gear unit against dirt and other contaminants. During
continuous operation of the gear unit and the associated heating, grease may drip from the area of
the Taconite seal. This is normal and is not due to a leak.
4.13 Checklist
4.13.1 Obligatory
Checklist
Item to be checked
Date
of check: Information
see Section
Can transport damage or other damage be found? 3.3.1
Does the version on the name plate comply with the
specifications? 2.2
Does the required mounting position comply with the actual
position? 7.1
Has the correct oil level for the version been checked? 5.2.5
Has the vent been fitted and activated? 4.2
Has the gear unit been earthed? 3.4
Has the gear unit been aligned properly? 3.4
Has the gear unit been installed free of tension? 3.4
Are the external gear shaft forces within the permitted limits? 3.5
Is the coupling between the gear unit and the motor correctly
installed? 3.16
Was the gear unit checked in a test run? 4.12
Table 11: Obligatory checklist for commissioning