Nord Drivesystems NORDAC FLEX SK 205E Series, Brief Instructions

Page: 60 / 100

NORDAC FLEX (SK 200E ... SK 235E) – Brief instructions for Frequency Inverters
60 BU 0240 en-US-4920
Pos: 242 /Anleitungen/El ektr onik/FU und Starter/4. Inbetriebnahm e/SK 1xxE, SK 2xxE, -FD S/Inbetriebnahme Gerät/DIP- Schalter Analog eingang (nur SK 2x0E) [SK 2xxE] @ 1\m od_1343221317551_14638.docx @ 37526 @ 45 @ 1
4.2.2.3 DIP switches, analog input (only SK 2x0E)
The analog inputs in the SK 2x0E are suitable for current and voltage
setpoints. For correct processing of current setpoints (0-20 mA/4-20 mA)
the relevant DIP switch must be set for current signals ("ON").
Adjustment to wire-break-proof signals (2-10 V/4-20 mA) is made via
parameters (P402) and (P403).
Access to DIP switches
SK 2x0E Access Detail
Size 1 … 3 … from outside,
middle diagnostic
opening
Size 4 ... from inside
Pos: 243 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uch kompakt --------- @ 13\m od_1476369695906_0.docx @ 2265496 @ @ 1