The Infrared Thermometer SP has an accuracy of
plus or minus 4° F
(2.5° C)
and is not intended to be
a scientific instrument. Do not use this device if you
require accuracy greater than this tolerance.
To Avoid Personal Injury, Follow These Guidelines:
•
Do not point laser directly at the eye or indirectly
off reflective surfaces.
•
Do not use the thermometer if it operates abnor-
mally. When in doubt, have the thermometer
serviced by a certified NorCross
®
repair facility.
•
Do not operate the thermometer around explo-
sive liquids, gases, or vapors.
•
Reflective objects will often result in lower than
actual temperature measurements. Do not
touch any surface suspected of being hot.
•
Do not use in a manner not specified by this manual.
To Avoid Damage to the Thermometer, Follow These Guidelines:
•
Do not expose to EMF (electro-magnetic fields) from arc welders, induction
heaters, etc.
•
Do not expose to static electricity.
•
Do not expose to thermal shock caused by large or abrupt ambient tempera-
ture changes. Allow 30 minutes for the thermometer to stabilize to a new
environment before use.
•
Periodically wipe the case with a dry cloth. Do not use abrasives, cleaning
chemical or solvents on this device. If necessary use a damp cloth to remove
debris buildup.
•
Do not store in a high temperature environment (automobile, vehicle or boat
dashboard, direct sunlight, etc).
•
Remove the batteries during storage to prevent damage from leaking batteries.
Infrared Thermometer SP
Instruction Manual
P/N: IR101SP
- 1 -
