Norco SHB-970, User Manual, Page: 29 / 57

SHB-970
Industrial Full Size CPU Card
19
Chapter 3 BIOS SETUP
AMI BIOS Flash
BIOS functions as a bridge connecting hardware and operating system. Hardware and software are
upgrading all the time, so when your system goes wrong, for example, your system can not support
the newest CPU, you need to upgrade BIOS to keep up with the latest technology.
AFUEFI.EXE is the FLASH IC program for BIOS to upgrade, which needs to be run in DOS mode.
Pls use a boot disk to load DOS, then run AFUEFI.EXE to upgrade BIOS
（
for example: write
XXXX.ROM into FLASH IC
）
Command format
：
A
．
Flash BIOS: AFUEFI XXXX.rom / P /B /N /X
If you need to add other parameters, pls add <space>/? after the order format
B
．
Flash BIOS & ME: FPT /F XXXX.bin\
Remark:
1. BIOS upgrading is only executed when your system goes wrong.
2. Please use the flash program in the CD-ROM provided by us or downloads the latest version of
the upgrading program on-line
3. Please do not power off or reboot the system when upgrading, otherwise, the BIOS maybe be
damaged or system may not be able to boot again.
4. After completing flash, please manually load default to optimize BIOS setting.
5. Please backup your BIOS before upgrading
AMI BIOS Description
When the computer is power on, BIOS will conduct self-diagnosis to its hardware on motherboard
and configure hardware parameter, finally the operating system will take control. BIOS is the
communication bridge between hardware and O/S. Correct configuration of BIOS is critical for
maintaining system stability and its optimized performance.
BIOS Setting:
1. Power on or reboot the system, self-diagnosis information is shown on the screen