Norco EMB-3501, User Manual, Page: 35 / 40

EMB-3501 V1.0 Freescale i.MX6 Platform Motherboard
25
3.2.6 TF Card Part
Supported, and it needs to be mounted and tested
Instruction: Insert TF card into USB port, and check USB flash disk device: fdisk
–l
Mount TF card under system: mount /dev
/mmcblk1p1
/mnt
Enter TF card directory and operate on files in TF card: cd /mnt
3.2.7 SATA Hardware Part
Supported, and it needs to be mounted and tested
Instruction: Connect hard disk to SATA port when power off, and check hardware device: fdisk
–l
Mount SATA hard disk under system: mount /dev/sdX1 /mnt (sdX1 is SATA hard disk device)
Enter SATA hard disk directory and operate on files in hard disk
3.2.8 WIFI Part
Supported, and it needs to be iwlist iwconfig tested
Instruction:
Acquire every applicable AP: iwlist wlan0 scan
Connect wireless AP: iwconfig wlan0 essid xxxx
Set wlan0 IP address: iwconfig wlan0 xx.xx.xx.xx
ping route
: ping xx.xx.xx.xx
3.2.9 3G Part
Customize drive according to 3G module customer used.
3.2.10 Ethernet Part
Supported, and it needs to be tested with ifconfig dhcp ping
Instruction:
Check WLAN card device: ifconfig -a
Allocate WLAN card static IP address ifconfig ethX X.X.X.X or use dynamic allocation:
dhclient ethX
Ping route
：
ping xx.xx.xx.xx