Norco BPC-7971, User Manual

Page: 60 / 76

BPC-7971 User's Manual
46
Port 60/64 Emulation
This control USB port 64/60 Emulation function. When this function is enabled, the USB
keyboard can make some special key combinations. The setting value is
：
Disabled, Enabled.
USB Transfer time-out
Timeout of setup control, batch, and interrupt transfer. The default is 20 seconds.
Device reset time-out
Set the boot command timeout time for a large USB disk. The default is 20 seconds.
Device Power-up Delay
Set the maximum delay time for USB devices to report to the main controller.
Mass Storage Devices
This item is used to set the specific type of USB device connected, the setting value is
[Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM], default Auto.
3.3 Chipset Menu
System Agent (SA) Configuration
North Bridge Configuration. Including display memory, display device, LVDS and other