Setting the Audio Setup
D.R.C(Dynamic range control)
Select the dynamic range compression to fit
the individual listening situation of the audi-
ence. The default setting is OFF.
The variable range is from FULL, 7/8~1/8
or OFF.
•
FULL:
Audio with fully compressed dy-
namic range.
•
7/8~1/8:
Audio with partially compressed
dynamic range.
•
OFF:
Audio with uncompressed dynamic
range.
Note:
•
In many listening situations, it is objection-
able to allow the sound to become very
loud, and thus the loudest sounds must be
compressed downwards in level. Like-
wise, the very quiet sounds would be in-
audible and must be brought upwards in
level to be heard. Dolby Digital satisfies
these needs with dynamic range compres-
sion.
Digital output setting
Set the digital output according to your optional
audio equipment connection. The default set-
ting is ALL.
•
ALL:
Raw data via DIGITAL OUTPUT.
•
PCM:
PCM data via DIGITAL OUTPUT.
•
OFF:
To deactivate the DIGITAL OUTPUT.
Notes:
• It is better
to
select PCM digital output when
external source cannot decode Dolby
Digital and DTS.
LPCM output setting
If you connect the DVD receiver to a PCM com-
patible receiver via the digital terminals, such
as coaxial, you may need to adjust LPCM out-
put. Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
the sound quality. The default setting is 48K.
D.R.C
BASIC PLAYBACK
18
Summary of Contents for DP5000
Page 1: ...DVD RECEIVER DP5000...
Page 32: ......
