17
Video Output Setting
Video output selection enables you to choose
the type of video output suitable for your DVD
system. The default setting is S-VIDEO.
S-VIDEO
Select
S-VIDEO
if you have connected the S-
VIDEO output to your TV using S-VIDEO jack.
PR PB Y
Select
PR PB Y
if you have connected the Pr
Pb Y
output to your TV using Pr Pb Y jack.
Angle Mark Setting
If the disc contains sequences recorded from
different camera angles, this allows you to
view the picture from different angles. The
selections of angle are depending on the disc
format. The default setting is ON.
ON:
appears on the TV screen
when angles
are available on the disc.
Setting the Speaker Setup
Center Delay Setting
If the listening position is closer to the center
speaker than the front speakers, you can set
the center delay time to improve the surround
sound effect. The default setting is OFF.
Options: 5ms, 4ms, 3ms, 2ms, 1ms, or
OFF.
Rear Delay Setting
If the listening position is closer to the rear
surround speakers than the front speakers,
you can set the rear delay time to improve the
surround sound effect. The default setting is
OFF.
Options: 15ms, 12ms, 9ms, 6ms, 3ms,
or OFF.
Test Tone Setting (disc mode only)
If set to ON, the system will test the speaker
settings. The test signal is generated through
the Left, Center, Right, Right surround, Left
surround and Subwoofer. The default setting
is OFF.
BASIC PLAYBACK
OFF:
does not appear.
OSD Language Setting
Select the language for on-screen display.
The default setting is ENGLISH.
ENGLISH
Screen Saver Setting
If set to ON, when you leave the system in
stop mode for more than five minutes, the
screen saver will be activated. The default
setting is ON.
Summary of Contents for DP5000
Page 1: ...DVD RECEIVER DP5000...
Page 32: ......
