28
Using the RespSense II Monitor
Reset Device to Factory Defaults
This setting discards all user settings and returns the monitor to the factory default settings and
alarm limits.
Restore Factory Defaults
1. Access the Responsible Organizations Settings screen.
2. Press
Reset Device to Factory Defaults
.
3. In the “Factory Restore” pop-up window:
• Press
Yes
to restore the factory defaults. The monitor:
- Reverts to the factory default minimum alarm volume,
default alarm volume, and alarm limits (see table 5).
- Deletes the PIN.
- Removes the Responsible Organization Settings limit restrictions.
• Press
No
to cancel.
New PIN
NOTE:
The operator is required to enter a new 4-digit PIN the first time the Responsible
Organization Settings screen is accessed or after restoring factory defaults.
The PIN, which may be set to any 4-digit number, is used to unlock parameter settings on the
Responsible Organization Settings screen.
Change the PIN
1. Access the Responsible Organizations Settings screen.
2. Press
New PIN
.
3. In the “Enter New PIN” pop-up window, enter a
4-digit PIN.
NOTE:
If the PIN is less than four digits, the
“Invalid PIN Entered” pop-up window displays.
Press
OK
to acknowledge and press
New PIN
again.
4. Press
OK
to save the new PIN. To exit without
saving changes, press
Cancel
.
5. Display returns to the Responsible Organization Settings screen.
Factory Service
This feature is only used by Nonin Medical, Inc.