Instructions for Use
NoninConnect™ Model 3245 Pulse Oximeter with
Bluetooth
®
Smart Technology
The NoninConnect Model 3245 Finger Pulse
Oximeter measures and displays blood oxygen
saturation (%SpO
2
) and pulse rate. It is used for
spot-checking on fingers that are between 0.8 –
2.5 cm (0.3 – 1.0 inch) thick.
NoninConnect is not a medical device and
therefore does not require a prescription from a
doctor.
Installing AAA Batteries
Before changing batteries, make sure the product
is off and is not applied to a finger.
Follow local disposal and recycling laws for the
NoninConnect and its components, including
batteries.
Keep the oximeter away from young children.
Small items such as the battery door and battery
are choking hazards.
NONINCONNECT MODEL
3245
NONIN MEDICAL, INC.
PL
YMOUTH, MN USA
IP32
NONINCONNECT MODEL 3245
NONIN MEDICAL, INC.
PLYMOUTH, MN USA
IP32
NON
IN
CON
N
ECT MOD
EL
324
5
NO
NIN
MEDICAL, INC.
PL
YMOUTH
, MN USA
IP32
Turning On the NoninConnect
Symbols
Connection via
Bluetooth
Wireless Technology
Download the NoninConnect mobile app from the iTunes® store.
When NoninConnect is placed on the finger and turns on, it is ready for a
Bluetooth
wireless connection. NoninConnect stays in this mode until it is shut off. Refer to the
Symbols table for the
Bluetooth
radio symbol
descriptions.
Cleaning the NoninConnect Model 3245
1. To clean, wipe the NoninConnect’s surfaces with a soft cloth dampened with
one of the following:
•
A 10% bleach solution (household bleach [5.25% sodium hypochlorite]).
•
Warm, soapy water (hand dishwashing detergent), and then rinse the cleaned
surfaces with a soft cloth dampened with water.
2. Dry with a soft cloth, or allow to air dry. Ensure that all surfaces are completely dry.
Caution:
Do not place this product in liquid or clean it with agents containing
ammonium chloride, isopropyl alcohol, or products that are not listed in these
instructions.
Symbol
Description
CorrectCheck™ – slide finger further into the NoninConnect.
Percent oxygen in your blood.
Pulse rate.
– – –
Displays when NoninConnect is unable to detect a usable signal.
White symbol
– Radio is on.
Green symbol
– Connected.
Flashing white symbol
– Connection error. The radio will reset.
Poor signal. NoninConnect may not work when circulation is
reduced. Steady your hand, reposition finger, warm finger by
rubbing, or select a different finger.
Replace batteries.
Battery orientation
SN
Serial Number
BDA
Bluetooth
Device Address
Download the NoninConnect mobile app from the iTunes
®
store.
