24
COMBO
COMBO mode, a combination of both SELF TRIGGER and BAR GRAPH modes, is
designed for situations where both types of data are needed. The files for these will
be split into each type and stored. This mode provides both the data collection from
a period of time and detailed analysis of events over their trigger level. The Super
Graphics program allows you to match these files together for a complete analysis.
When you select COMBO from the main menu and choose EDIT, the settings that
will display are the same as those listed above for SELF TRIGGER and BAR GRAPH
modes.
High Level Steps for COMBO Mode:
1.
Set to monitor
2.
Trigger waveform
3.
Allow it to go to sleep
4.
Wake it up
5.
Exit
