A
CCESS
G
ATEWAY
Installing the Access Gateway
41
Figure 2:
Initial WAN port settings
A WAN port summary page will then be displayed as shown in Figure 3.
Port Name : WAN
Port Role : wanIf
Configuration Mode : static
IP Address : Your IP address
Subnet Mask : Your subnet mask
Gateway IP : Your gateway IP address
WAN 802.1Q tagging : Disabled
VLAN ID : 1
DNS Domain Name : nomadix.com
DNS Server 1 : Your primary DNS IP address
DNS Server 2 :
DNS Server 3 : 0.0.0.0
Additional NAT IP addresses : Disabled
show all - Show all WAN Interface configuration
show interface <name> - Show a single WAN Interface configuration
modify interface <name> - Modify a single WAN Interface configuration
Type b to go back, <esc> to abort, ? for help.
Ethernet port/WAN interface configuration>
Figure 3:
WAN port static IP configuration summary page.
If everything is correct in the summary, type (
b
)ack to return to the previous menu, and proceed to Step 2
to enter the location information.
Otherwise, select an option from the Ethernet port configuration menu to display or make changes
to the WAN port settings. When finished with the settings, type
b
(ack) to return to the previous
menu, and go to Step 2.
Step 1b: DHCP Client Configuration
Type (
d
)hcp for the configuration mode as shown in Figure 4.
Configuring minimal WAN interface connectivity parameters:
Configuration Mode [static ] (static, dhcp, pppoe) : d
WAN 802.1Q tagging [Disabled ] :
VLAN ID [1 ] :
DNS Server 3 [0.0.0.0 ] :
Figure 4
: Selecting DHCP Client for WAN configuration.
Summary of Contents for AG 2300
Page 1: ......