A
CCESS
G
ATEWAY
40
Installing the Access Gateway
Configuration
Note: The WAN port of the AG must be connected to a live network that can access the Internet in order to
retrieve the license key from the license key server.
Log in by typing
admin
then password:
admin
. Type (
y
)es when prompted to configure settings. The initial
minimal WAN port configuration mode will be displayed as shown in Figure 1.
Ready. Press enter to login. NSE
Login:
admin <Enter>
Password:
***** <Enter>
NO LICENSE KEY HAS BEEN ENTERED. A LICENSE KEY MUST BE ENTERED IN
ORDER TO PROCEED WITH INSTALLATION.
SEE USER'S GUIDE FOR LICENSE KEY INFORMATION.
INSTALLATION WILL NOW TRY TO CONTACT THE NOMADIX LICENSE KEY SERVER.
IN ORDER TO PROCEED, THE NSE MUST BE ABLE TO CONNECT TO THE INTERNET.
DO YOU WANT TO CONFIGURE THE NSE'S IP AND DNS SETTINGS? [yes/no]:
y
Configuring minimal WAN interface connectivity parameters:
Configuration Mode
[static]
(static, dhcp, pppoe) :
Figure 1:
Initial minimal WAN port configuration.
Select the desired configuration mode and use the following steps to configure the WAN port for either Static
IP, DHCP client or PPPoE.
Step 1a: Static WAN IP Configuration
Accept static as the default configuration mode and enter the following mandatory settings shown in Figure 2.
Configuring minimal WAN interface connectivity parameters:
Configuration Mode [static ] (static, dhcp, pppoe) :
IP Address [10.0.0.10 ] : Your WAN IP address
Subnet Mask [255.255.255.0 ] : Your subnet mask
Gateway IP [10.0.0.1 ] : Your gateway IP address
WAN 802.1Q tagging [Disabled ] :
VLAN ID [1 ] :
DNS Domain Name [nomadix.com ] :
DNS Server 1 [0.0.0.2 ] : Your primary DNS IP
DNS Server 2 [0.0.0.0 ] :
DNS Server 3 [0.0.0.0 ] :
Summary of Contents for AG 2300
Page 1: ......