Nomadix AG 2300, User Manual, Page: 259 / 294

A
CCESS
G
ATEWAY
Quick Reference Guide 247

Class

Nomadix VSAs:

Nomadix-Subnet

Nomadix-URL-Redirection
 Nomadix-IP-Upsell
 Acct-Session-Time (Stop)

Terminate-Cause (Stop)

NAS ID

NAS-IP Address

NAS-Port-Type

NAS-Port

Framed-IP Address

Acct-Delay-Time

Called-Station-ID

Calling-Station-ID

MaxBytesTotal

MaxGigawordsTotal
Selected Detailed Descriptions
Acct-Session-ID
The Acct-Session-ID is created when the RADIUS authentication request is built. It is transmitted in both the
Access-Request and the Accounting-Request.
Session Timeout
There is currently no default session timeout that you can set in the Access Gateway Web Management
Interface (WMI). If the Radius server does not send a Session-Timeout, the Access Gateway will set the
subscriber expiration time to 0, which means access forever.
Log-Off-URL
Allows for the placement of a log off URL (for example, 1.1.1.1) on an external portal page.
MaxBytesTotal
Number of total bytes, to support volume-based billing for total of upstream and downstream traffic. Note that
MaxBytesTotal will reset to zero at 4 gigabytes. Use with MaxGigawordsTotal if volume of data may exceed
4 gigabytes.
MaxGigawordsTotal
Number of total gigabytes, to support volume-based billing for total of upstream and downstream traffic. Note
that MaxGigawordsTotal is an integer value; use with MaxBytesTotal if you need volume granularity of more
than 4 gigabytes.