Nomadix AG 2300, User Manual, Page: 234 / 294

A
CCESS
G
ATEWAY
222 Quick Reference Guide
System Menu Items
Items Description
ARP Adds or deletes an Address Resolution Protocol (ARP) table entry.
Bridge Mode Enables the Bridge Mode option.
Dynamic Proxy A function that assures a subscriber can be connected.
Export Exports the system’s configuration settings to an archive file.
Factory Imports the factory default settings.
Fail Over Sets up a “sibling” Nomadix Gateway, allowing one device to take up the users
should the other device become disconnected from the network.
History Displays a history log of the system’s activity, including Access , Reboot and
Uptime .
ICMP Sets up ICMP blocking for traffic from “pending” or “non-authenticated” users
that are destined to addresses other than those defined in the pass- through
(walled garden) list.
Import Imports previously exported system configuration settings from an archive file.
Login Sets up the login name and password.
Mac Filtering Blocks malicious users based on their MAC address. Up to 50 MAC addresses can
be blocked at any one time.
Memory Utilization Displays a listing of the current system Memory and how much is allocated, free,
or in use.
Packet Capture
Reboot Reboots the Nomadix Access Gateway.
Routing View Nomadix Access Gateway’s routing table; Add or delete a route to a specific
IP destination.
Session Limit Limits the number sessions any one user can take over a given time period and, if
necessary, then blocks malicious users.
Static Port Mapping Set up or delete static port-mapping schemes.
Subscriber Interfaces Blocks subscriber interfaces.
Syslog Displays syslog history.
System Utilization Displays system utilization information.
Upgrade Obtain the latest Firmware Upgrade Procedure from Nomadix Technical Support.
User Settings Blocks IPPROTO traffic from misconfigured subscribers.