
A
CCESS
G
ATEWAY
System Administration
113
2.
If required, enable
Passthrough Addresses
, then click on the
Save
button.
If you are supporting Facebook authentication, you must add Passthrough Addresses
www.facebook.com:443 and fbstatic-a.akamaihd.net.
3.
In the
IP/DNS Name
field, enter the IP address or DNS name of the pass-through you want to add or
remove from the system.
4.
If adding this pass-through, click on the
Add
button, otherwise click on
Remove
to delete this pass-
through from the list.
Assigning a PMS Service {PMS}
If you are supporting Facebook authentication, you must add Passthrough Addresses
www.facebook.com:443 and fbstatic-a.akamaihd.net.
The Access Gateway can be integrated with existing Property Management Systems. For example, by
integrating with a hotel’s PMS, the Access Gateway can post charges for Internet access directly to a guest’s
hotel bill. In this case, the guest is billed only once. The Access Gateway outputs a call accounting record to
the PMS system whenever a subscriber purchases Internet service and decides to post the charges to their
room. The Access Gateway offers “post-paid” PMS billing functionality for all supported PMS interfaces,
providing hotel guests with the option to terminate their connection (via the ICC) and be billed only for the
actual time he/she was online. The Access Gateway is equipped with a serial port to facilitate connectivity
with a customer’s Property Management System.
Some PMS vendors may require you to obtain a license before integrating the PMS with
the Access Gateway. Check with the PMS vendor.
Some Property Management Systems may use interfaces that are incompatible with the
Access Gateway. If your Access Gateway is having trouble communicating with a solution
provider’s PMS, please contact technical support. Refer to
Before you can change the PMS settings, a PMS must be connected to the Access Gateway via the serial port
on the rear panel. See also
Connecting the Access Gateway to the Customer’s Network
on page 55.
Summary of Contents for AG 2300
Page 1: ......