Nomadix AG 2300, User Manual, Page: 113 / 294

A
CCESS
G
ATEWAY
System Administration 101
3.
If you enabled iNAT, you have the option of enabling or disabling the following VPN protocols:
•
PPTP
•
PPTP CALL ID
•
IPSEC
4. Click on the Save button to save your options.
Use the
iNAT Start
and
iNAT End
fields to enter an IP address or range of IP addresses (up to 50), then
click on the Add button to add the IP address(es), or click on the Remove button to delete the IP
address(es) from the database.
Interface Monitoring
As a complementary feature to Load Balancing, you can actively monitor each WAN connection to assure
that full network functionality exists.
Interface Monitoring must be enabled; it is off by default. It is set separately for each configured WAN
interface.
Three failures must occur before the system sets the port status to Unavailable and re-assigns subscribers.
Monitoring may be configured for both the Monitoring Interval (default is 60 seconds) and for three different
methods as required by the network:

The default method (Automatic) will generate a random DNS query to each configured DNS
server. Receiving an
?Error?
back from the server(s) verifies full network connectivity.

Host Probing (Ping) — A Host or IPaddress can be pinged to verify connectivity via ICMP
response.
 Host Probing (HTTP) will generate an HTTP GET to the configured Web address. The HTTP
response will verify network connectivity.
To view configured WAN interfaces, select Configuration > Interface Monitoring in the Web
Management Interface. The Interface Monitoring Settings screen appears:
Click on any interface name to configure individual interface settings: