Tr
oubleshoo
ting
3. Insert the middle section (B) of the tree into the bottom section ( C) (see Fig. 2).
4. Insert the top section (A) into the middle section (B) (see Fig. 3).
7. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and
one along the centre of the main stem. Repeat pattern for each branch (see Fig. 6).
6. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches be
sure that all wires are free of branch hinges (see Fig. 5).
8. Plug the adapter into electric outlet (see Fig. 7). Please note this tree comes with an on/off foot pedal
switch for easy illumination.
If any lights do not work on your pre-lighted tree, please check the following:
TROUBLESHOOTING:
1. If entire tree or a section of the tree does not light:
a) Make sure the adaptor plug is securely inserted into a working electrical outlet.
b) Make sure the end connector of foot pedal switch is well connected to the bottom section ( C).
c) Check that each section of the tree is well connected.
IMPORTANT SAFETY INSTRUCTIONS
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products
are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installation.
c) This seasonal product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles, or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let bulbs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury, and electric shock
it should not be played with or placed where small children can reach it.
i) Do not use this product for anything other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l) Do not cover the product with cloth, paper, or any material not part of the product when in use.
m) Read and follow all instructions that are on the product or provided with the product.
n)
SAVE THESE INSTRUCTIONS.
When using electrical products, basic precautions should always be followed including the following:
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the bulb holders or enclosures, loose connections,
b) When storing the product, carefully remove the product from wherever it is placed, to avoid any
or exposed copper wire.
Use and care instructions
undue strain or stress on the product conductors, connections, and wires.
5. Insert end connector of the provided on/off foot pedal switch into the connector fixed on the pole of
tree bottom ( C) in correct direction (always match the protuberance of the end connector of power
cord to the concave of the connector found on the bottom section (C) according to the magnified
drawing in Fig. 4).
2. If you are still experiencing problems with the tree please call 1-866-827-4985 for customer service.
