1. Cast aluminum housing
2. Photocell
3. Diffuser lens
4. Cover plate with screws
1
2
4
3
ELECTRICAL INSTALLATION:
1) Place the wall switch in the OFF position.
2) Depending on which type of fuse box you
have in your home: Place either the main
(Master) switch in the OFF position,
cutting off power to your entire home,
OR turn off the individual switch that
provides power to where the fixture
will be installed.
OR
3) Place either the main (Master) switch
in the OFF position, cutting off power
to the entire home, OR unscrew the fuse
that provides power to where the fixture
will be installed.
NOTE:
Shutting off a wall switch that controls the light is not
sufficient to prevent electric shock.
WARNING:
This product must be installed in accordance
with the applicable installation code by a person familiar
with the construction and operation of the product and the
hazards involved.
NOTE:
Hardware included for mounting to wood surfaces only! Ensure that fixture is mounted onto structurally sound surface that will
support the fixture.
FIXTURE MOUNTING
1. Mark hole locations and drill 3/16” (4.8 mm) diameter pilot holes.
2. Install two 2” (50.8 mm) screws (4) in bottom holes, leaving about 3/8” (9.5 mm) space under the head.
3. Install the third 2” (50.8) screw (4) into the predrilled hole on top and back the screw out. This will leave the hole threaded
and make installation easier.
4. Place fixture housing on the two bottom screws and install third screw.
5. Tighten two bottom screws to secure fixture.
CAUTION: Make sure power is turned off when installing the fixture.
Instruction Manual
For outdoor use
Retain carton for storage purposes
LED AREA LIGHT
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Before use of this product, familiarize yourself with all operating features and safety rules.
Know Y
our Da
wn LED Area light
Installation Guide
model no. 052-7813-0 | contact us: 1.888.827.4985
