5. If the wireless interference results in the positioning slowing of the device, please re-pair and
refer to the pairing instructions.
设备配对方法
Device Pairing Method
1.
开启所有
NOLO
设备
(
头盔定位器连接到华为
VR Glass
）
1. Turn on all NOLO devices (The headset marker connects to HUAWEI VR Glass).
2.
长按定位基站配对键
(
如图所示
)
，进入配对模式，定位基站指示灯呈绿色闪烁状态。
2. Long press the Pairing Key of the positioning base station (as shown) to enter the pairing mode
with the indicator lamp shining in green.
3.
分别长按两支交互手柄的配对键
(
如图所示），直至手柄震动。每次配对过程中每支交互手
柄只需配对一次，请不要重复配对。
3. Respectively long press the Pairing Key of the two interactive controllers (as shown) till the
controller vibrates. During each pairing process, each controller can only be paired once. Please
do not re-pair.
4.
长按头盔定位器的配对键，直至头盔定位器指示灯红色
LED
闪烁一次。
4. Long press the Pairing Key of the headset marker till the red LED of the indicator lamp flashes
once.