Introduction
The PMR Wireless Stereo Headset offers the latest innovation in
Bluetooth technology. It wirelessly receives stereo audio sound **
from a Bluetooth mobile phone, MP3 player, Bluetooth stereo
player or a Bluetooth enabled PC with suitable software.
** compatible stereo Bluetooth devices must support the
Bluetooth profile known as ‘Advanced Audio Distribution Profile
(A2DP)’
The Wireless Stereo Headset is also capable of simultaneous
connection to a Bluetooth enabled mobile phone using Headset
or Handsfree profile. You need never miss a call while enjoying
your music wirelessly.
Getting Started
Remove all components from the package. Items in the pack include:
stereo headset, AC charge adapter, 2 small ear caps and this User
Guide. Please check the contents carefully and contact your local
dealer immediately if anything is missing or damaged.
Small Ear Caps
An optional pair of smaller ear caps is included. To swap the ear
caps gently pull the installed ear caps off the speakers. Gently
stretch the smaller ear caps over the speakers and push into
position.
Getting to Know Your Headset
See image above. Please note some models of headset will differ
slightly in style, colour and the functionality may vary according to
their specifications. For uptodate information check the support
section of the PMR web site: www.pmrtechnology.com/support.htm
Charging Your Headset
Before using the headset, you must charge it for approximately 2
hours. Fully charged, it can provide up to 5 hours of playing time and
100 hours of standby time.
Please note that talk time is also a function of the player/mobile
phone and their factory determined settings. So, you may find
this figure is reduced under certain conditions.
To charge the headset
1. Insert the mini USB plug of the AC Charger into the mini USB
charger socket on the headset.
2. Plug the AC charger into the mains and switch on.
3. When charging is complete, the amber LEDs will turn off.
4. Unplug the charger.
Battery Indication:
The amber LEDs can turn off after less than 2
hours charging; this normally indicates that the headset can be used.
However, for the initial charge, it is recommended that you
charge the headset for at least 2 hours in order to fully prepare
the battery for normal operation
.
Pairing Your Headset with a Stereo Player
Pairing is the Bluetooth process of initialising the wireless link
between the headset and a Bluetooth mobile phone**, a Bluetooth
stereo player** or a Bluetoothenabled PC**. Before you can use the
headset you must pair it with one of these devices. Normally you
only have to do this once. After pairing is complete the units will
(provided they are within range) find each other and reconnect
automatically at switch on.
Important Note (1): The headset will only pair automatically with
players that have the builtin PIN code: ‘0000’
To pair your Headset with a Stereo Player
1.
Before you commence pairing please ensure that both units are
fully charged.
2.
Ensure that no other nearby Bluetooth devices are active or in
pairing mode.
3.
Make sure the phone or player supports the Bluetooth A2DP
profile. (For Bluetoothenabled PCs or Notebooks you must
have a Bluetooth driver which supports the A2DP profile.)
4.
To turn on the headset press and hold the Talk button for about
2 seconds until both the blue and amber LEDs begin to flash
alternately. The headset is now turned on and in pairing mode.
5.
Ensure the headset is within 10 metres of the stereo player,
mobile phone, PC or laptop.
6.
Initiate device discovery feature on the player. Refer to your
player’s User Guide if you are not sure how to do this.
7.
The player should find the headset and pair with it. This is
indicated by the LEDs on the headset. The amber LED will stop
flashing and the blue LED will begin to flash slowly (approx
once every two seconds).
To pair your Headset with a Mobile Phone or PC/Laptop for stereo
audio playing.
(Please check the phone or PC software User Guide for details)
1.
Complete steps 1 through 5 above
2.
Initiate the device discovery feature on the player. Refer to
your player’s User Guide if you are not sure how to do this.
3.
The phone or PC should find the headset and display its
Bluetooth name ‘BTSHS’. Select this device.
4.
When prompted by the PC or phone, enter the default pin code
‘0000’.
5.
When pairing is complete the amber LED will stop flashing and
the blue LED will begin to flash slowly (approx once every two
seconds).
To cancel pairing mode
While the headset is in pairing mode,
you can cancel the pairing process and turn off the headset. Press
and hold the Talk button for about 3 seconds. The Blue LED will
switch on for about 1 second and then the headset will turn off.
Release the Talk button.
Pairing Tips:
+ Please refer to your phone or player’s user manual for further
information on ‘How to Pair’. Typically, you need to make your
phone ‘Discover’ the headset by using a ‘Bluetooth’, ‘Connect’ or
‘Setup’ menu then selecting an option to ‘Discover’ your headset
.
+ The headset, in normal operation, should maintain a link with the
player at all times once pairing has been successful and a
connection has been established between the two devices.
+ If you find that you cannot put the headset into pairing mode then
try temporarily switching off (or disabling Bluetooth on) the last
player or device used with the headset.
BLUETOOTH
STEREO HEADSET
P/N NSRTA3C2XXX
USER GUIDE
Declaration of Conformity
.
We declare that product NSRTA3C2XXX conforms to
the R&TTE Directive 1999/5/EC
