2
Configure the following parameters:
Table 8-13
WAN parameters
Field
Description
WAN connection list
Select a WAN connection from the list to set the connection parameters.
Enabled
Tap the Enable / Disable toggle to enable or disable the WAN connection.
Connection type
Select a connection type: IPoE or PPPoE.
Connection mode
Select the connection mode of the WAN connection:
• Route mode
• Bridge mode
IP mode
Select an IP mode from the list: IPv4 or IPv6.
Enable
Click to enable the WAN connection.
NAT
Select this checkbox to enable NAT.
Service
Enable/disable the following service types for this connection as required.
• VOIP
• TR-069
• INTERNET
• IPTV
Enable VLAN
Tap the Enable/disable toggle enable VLAN.
VLAN ID
Enter the VLAN ID.
VLAN PRI
Enter the VLAN PRI.
WAN IP Mode
Select an IP mode from the list.
Manual DNS
Enter the Domain Name Server (DNS) to be confirgured manually.
Custom primary DNS
Enter the primary Domain Name Server (DNS).
Custom secondary DNS
Enter the secondary Domain Name Server (DNS).
Connection Type:
PPPoE
Connection trigger
Select the connection trigger type from the drop down list. The default option is
Always On
.
Userrname
Enter the username to login to the configuration server.
Password
Enter the password to login to the configuration server.
Keep Alive Time
The PPPoE connection type triggers one heartbeat each, between 5 to 60 seconds to keep the
session online.
Enter the value between 5 to 60 seconds depending on the configuration type.
Keep Alive Retry
The PPPoE connection type sends out several heartbeats as retry time between 1 to 10 times.
Enter the value between 1 to 10 times as required.
Configure a XS-2426G-B indoor ONT
Network configuration
Configuring WAN
Nokia ONT
Review
Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
102
Issue 1