Edit a GPRS access point
Select an access point group and access point marked with
. Follow the instructions
from your service provider.
Select from the following:
Access point name
— The access point name is provided by your service provider.
User name
— The user name may be needed to make a data connection, and is usually
provided by your service provider.
Prompt password
— If you must enter the password every time you log in to a server,
or if you do not want to save your password in the device, select
Yes
.
Password
— A password may be needed to make a data connection and is usually
provided by your service provider.
Authentication
— To always send your password encrypted, select
Secure
. To send
your password encrypted when possible, select
Normal
.
Homepage
— Depending on the access point you are setting up, enter the web address
or the address of the multimedia message center.
Use access point
— Set the device to connect to the destination using this access point
after confirmation or automatically.
Modify advanced GPRS access point settings
Select
Options
>
Advanced settings
.
Select from the following:
Network type
— Select the internet protocol type to transfer data to and from your
device. The other settings depend on the selected network type.
Phone IP address
(for IPv4 only) — Enter the IP address of your device.
DNS addresses
— Enter the IP addresses of the primary and secondary DNS servers, if
required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address
— Enter the address of the proxy server.
Proxy port number
— Enter the port number of the proxy server.
Wi-Fi access point settings
Select
Menu
>
Settings
and
Connectivity
>
Destinations
>
Access point
, and follow
the instructions.
Edit a wireless LAN (Wi-Fi) access point
Select an access point group and access point marked with . Follow the instructions
from your WLAN service provider.
96 Connectivity
© 2009 Nokia. All rights reserved.
96
