1. Insert the SIM and memory
card
1. Open the SIM and memory card tray: push the
tray opener pin in the tray hole and slide the tray
out.
2. If you have a single-SIM phone, put a nano-SIM
card in slot 1 and a memory card in slot 2 on the
tray with the contact areas face down. If you have a
dual-SIM phone, put a nano-SIM card in slot 1 and
either a second SIM or a memory card in slot 2 with
the contact areas face down.
3. Slide the tray back in the slot.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important:
Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to
www.nokia.com/mobile-support.
USB-C USB micro-B
Get Started
Nokia
x
TA-1085/TA-
1096
EN
-LATAM
Main camera
Flash
Fingerprint
sensor
Headset connector
Microphone
Microphone
Loudspeaker
Front camera
Earpiece
USB connector
SIM and memory
card slot
Proximity
sensor
Volume keys
Power/Lock key
