•
the first character cannot be a special character
•
there are not enough character classes
1
Click
Maintenance→Password
from the left pane in the 10G PON Home Gateway page. The
Password page displays.
2
Configure the following parameters:
Table 8-39
Password parameters
Field
Description
Original Password
Enter the current password.
New Password
Enter the new password (must adhere to the password rules).
Re-enter password
Re-enter the new password (must match the new password entered above exactly).
Prompt message
Enter the password prompt message.
3
Click
Save
.
You can click
Refresh
to update the displayed information.
E
ND OF STEPS
Figure 8-45
Password page
Configure a XS-2426G-A indoor ONT
Maintenance
Configuring the password
Nokia ONT
Draft
Draft
December 2020
Issue 1
149
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA