GB 21
VIEWING MODE
General information
The following describes the basic functions of your Mediamaster
while watching satellite TV or listening to satellite radio.
Some of the functions described here are dependent on the
Service Provider and can only be used if they are included in
the transmitted programme information.
Please note
, that during the Channel Search procedure, the
Mediamaster may download a large number of channels. This
may include channels from various Service Providers, also those
to which you do not have access unless you have a smart card
from one of those Service Providers.
If you select a programme to which you do not have access, you
will get a message on the screen. This message may vary, de-
pending on Service Provider and used smart card/CA Module.
In addition to the normal functions like switching the Media-
master in/out of standby, changing the volume etc. there are
some other useful functions which will be explained in this part
of the manual.
You can always leave a menu at any time you want, without af-
fecting any settings, by pressing
back
.
If you are listening to radio and don´t press any buttons on the
remote control, the picture gets dim after 2 minutes.
Programme information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the Settings folder “User pref-
erences” menu you can select how long this information will be
shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and stop time of the current programme.
The start and stop time of the next programme.
Programme information will only be available if it is included
in the transmission. Otherwise a “No information available”
message will be shown.
Information
about the
current pro-
gramme
Channel list
Channel
name
Current
time
Information about
the next programme