Nokia IP561, Installation Manual, Page: 62 / 96

Replacing Other Components
62 Nokia IP561 Security Platform Installation Guide
Caution
To prevent the card from ejecting too quickly, hold the PC card while you push the eject
button.
Installing or Replacing a Hard-Disk Drive
The disk-based IP561 comes with one hard-disk drive.
The flash-based IP561 supports one optional hard-disk drive that you can use for logging.
When you purchase your IP561, you can order optional hard-disk drives for factory installation,
or you can order them later and install the hard-disk drive yourself, as described in this chapter.
Disk-based appliances use the disk for Nokia IPSO-VN ; the compact flash memory contains the
boot manager and IPSO-VN.
You can use a hard-disk drive for storing log files. See
“Configuring a Hard-Disk Drive for
Logging” on page 67 for information about configure the hard-disk drive for logging on
flash-based IP561 appliances. For the disk-based IP561, you do not need to configure the hard-
disk drive for logging.
This section describes how to install or replace a hard-disk drive.
Before You Begin
Caution
Hard-disk drives are susceptible to damage from shock. Handle them with care.
Caution
To help guard against electrostatic discharge damage, make sure you are properly
grounded by using a grounding wrist strap and following the instructions provided with
the wrist strap before you handle the components or open the appliance or gateway. If
you do not have a grounding wrist strap, make sure you are properly grounded before
you touch any electronic component.
To install or replace a hard-disk drive, you need:
„
Physical access to the appliance or gateway
„
Nokia hard-disk drive kit and accompanying supplement
„
A Phillips-head screwdriver
The following procedure requires removing the chassis tray assembly from the chassis.