Nokia IP561, Installation Manual, Page: 58 / 96

Replacing Other Components
58 Nokia IP561 Security Platform Installation Guide
Figure 19 Compact Flash Memory Card Slot
Caution
To protect the appliance and the compact flash memory from electrostatic discharge
damage, make sure you are properly grounded before you touch these components.
Use a grounding wrist strap and follow the instructions provided with the wrist strap
before you handle the components or open the appliance. If you do not have a
grounding wrist strap, make sure you are properly grounded before you touch any
electronic component.
You must perform an orderly shutdown of the appliance and turn the power off whenever you
remove the chassis tray assembly to service internal components.
Caution
You risk damage to the appliance or loss of data if you do not use the following
procedure when you replace the compact flash memory.
1. Use Nokia Network Voyager or the command-line interface (CLI) to perform an orderly
shutdown of the IP561 appliance.
For information about how to access Network Voyager and the related reference materials,
see
“Using Nokia Network Voyager” on page 40.
2. Turn off the power to the IP561 appliance.
Note
Make sure you turn off the power supply.
SLOT
1
SLO
T 2
SLOT
3
SLOT
4
1
2 3
4
00523gen