Nokia IP561, Installation Manual, Page: 27 / 96

Site Requirements, Warnings, and Cautions
Nokia IP561 Security Platform Installation Guide 27
Site Requirements, Warnings, and Cautions
Before you install a Nokia IP561 security platform, ensure that your computer room or wiring
closet conforms to the environmental specifications listed in
Appendix A, “Technical
Specifications.”
Warning
Excessive electromagnetic interference (EMI) can occur if you use controls, make
performance adjustments, or follow procedures that are not described in this document.
Warning
To reduce the risk of fire, electric shock, and injury when you use telephone equipment,
follow basic safety precautions. Do not use the product near water.
Warning
On Nokia IP561 security platforms intended for shipment outside of the United States, the
cord set might be optional. If a cord set is not provided, use a power cord rated at 10A, 250V,
maximum 15 feet long, made of HAR cordage and IEC fittings approved by the country of
end use.
Caution
Replace the battery only with the same or equivalent type battery recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's instructions.
Caution
Do not block any of the ventilation holes on the appliance. The components might
overheat and become damaged.
Software Requirements
The Nokia IP561 security platform supports the following applications and versions as of the
publication date for this guide:
„
Nokia IPSO-VN v4.1
For information about updates to the software requirements or additional applications that have
become available since this guide was published, contact your Nokia service provider, as listed
in
“Nokia Contact Information” on page 3.