To use the created profile for connecting to the
internet call service automatically, press , and
select
Tools
>
Connectivity
>
Internet tel.
>
Preferred profile
.
To log in to the internet call service manually, select
Registration
>
When needed
, and
Transport
type
>
UDP
or
TCP
in the SIP settings when
creating an internet call profile.
Connect to the internet call
service
To make or receive an internet call, your device must
be connected to an internet call service. If you have
selected automatic login, your device automatically
connects to the internet call service. If you log in to
the service manually, select an available network
from the list and
Select
.
When you are connected to an internet call service,
is shown in the standby mode.
The list of networks is refreshed automatically every
15 seconds. To refresh the list manually, select
Options
>
Refresh
. Use this option if your WLAN
access point is not shown.
To select an internet call service for outgoing calls
if the device is connected to more than one service,
select
Options
>
Change service
.
To configure new services, select
Options
>
Configure service
. This option is shown only if
there are services that have not been configured.
To save the network to which you are currently
connected, select
Options
>
Save network
. The
saved networks are marked with a star in the list of
networks.
To connect to an internet call service using a hidden
WLAN, select
Options
>
Use hidden network
.
To end the connection to an internet call service,
select
Options
>
Disconnect from serv.
.
Make internet calls
When you have activated the internet call feature,
you can make an internet call from all applications
where you can make a regular voice call. For
example, in Contacts, scroll to the desired contact,
and select
Call
>
Options
>
Internet call
.
To make an internet call in the standby mode, enter
the phone number or internet address, and press
the call key.
To make an internet call to an address that does not
start with a digit, press any number key when the
device is in the standby mode, then press
#
for a
few seconds to clear the display and to switch the
129
Make call
s
