Before you can send, receive, retrieve, reply to, and
forward e-mail on your device, you must also do the
following:
•
Configure an internet access point (IAP). See "Access
•
Set up an e-mail account, and define the e-mail
settings correctly. See "E-mail account
Follow the instructions from your remote mailbox and
internet service providers. Contact your network and
internet service providers or operator for the correct
settings.
Set up your e-mail with the
mailbox guide
If you select
>
Messaging
>
Mailbox
, and have not
set up your e-mail account, you are prompted to do so.
To start setting up the e-mail account with the mailbox
guide, select
Yes
.
1. To start entering the e-mail settings, select
Start
.
2. In
Mailbox type
, select
IMAP4
or
POP3
, and select
Next
.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve
e-mail or internet mail messages from a
server. IMAP4 is a version of the internet
message access protocol that lets you
access and manage e-mail messages while
the messages are still on the e-mail server.
You can then choose which messages to
download to your device.
3. In
My e-mail address
, enter your e-mail address.
Select
Next
.
4. In
Incoming mail server
, enter the name of the
remote server that receives your e-mail, and select
Next
.
5. In
Outgoing mail server
, enter the name of the
remote server that sends your e-mail, and select
Next
. Depending on your mobile operator, you
might have to use your mobile operator's outgoing
mail server instead of your e-mail provider's.
6. In
Access point
, select the internet access point your
device should use when it retrieves the e-mail. If you
select
Always ask
, each time the device starts to
retrieve e-mail, it asks which internet access point
it should use. Select
Next
.
7. Enter a name for your new mailbox, and select
Finish
.
When you create a new mailbox, the name you give to
the mailbox replaces
Mailbox
in the Messaging main
view. You can have up to six mailboxes.
If you have defined several mailboxes, select one of
them as your default mailbox. That mailbox is used
every time you start composing a new e-mail message.
To define the default mailbox, select
Options
>
Settings
>
>
{No display_text mapping for
'qtn_mce_settings_mail_default.mcesettings_diy',
locale='en'}
and the mailbox.
33
Messaging
file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
Page 33
Jan 8, 2007 1:39:30 PM
file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
Page 33
Jan 8, 2007 1:39:30 PM
