manualshive.com logo in svg

Nokia COMMUNICATOR 9210i, User Manual

Share
Download
Nokia COMMUNICATOR 9210i User Manual Download Page 181

Copyright © 2000-2003 Nokia. All rights reserved.

175

Messaging

Sync. mails in folders

: 

 Specifies the number of message headers to be retrieved from 

the folders of the remote mailbox excluding Inbox. The options are All/
None or you can define the appropriate number of messages to be 
retrieved.

Advanced page

Default mail type

: 

The type of mail that you can write and send from your 

communicator. The options are Plain text (no MIME)/Plain text/Formatted 
text (HTML).

Send mail

: 

How mail is sent from your communicator. The options are Immediately/

During next connection/Upon request.

Include signature

: 

Specifies whether your signature is attached to sent mail. The 

options are No/Use my contact card/Custom. If you choose Custom, you can 
press 

Edit signature

 to modify the signature file.

Request read report

: 

The options are Yes/No. If you choose Yes, you will receive a 

notification when the recipient has opened your mail. You can only 
receive a notification if the recipient’s e-mail application supports this 
feature. 

Allow report requests

: 

The options are Yes/No. If you choose No the sender of a 

message you receive will not get a notification, when you open the 
message.

Copy to my mail address

: 

The options are Yes/No.

Secure login (APOP)

: 

Used with POP3 protocol to encrypt the sending of passwords 

to a remote mail server. The options are Yes/No. 

Secure connection (TLS)

: 

Used with POP3, IMAP4 and SMTP protocols to secure the 

connection to a remote mailbox. The options are Yes/No. 

Summary of Contents for COMMUNICATOR 9210i



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands