Nokia BH-905I User Manual Download Page 4

I n t r o d u c t i o n

4

1. Introduction

The Nokia Bluetooth Stereo Headset BH-905i with active noise 
cancellation allows you to handle calls hands-free with a compatible 
mobile device and listen to music from a compatible music player.

Active noise cancellation helps you to use the headset also in noisy 
environments.

You can connect the headset to a compatible device using Bluetooth 
wireless technology or the supplied audio cables.

Read this user guide carefully before using the headset. Also, read the 
user guide for the device that you connect to the headset. For more 
information, see www.nokia.com/support or your local Nokia website.

This product may contain small parts. Keep them out of the reach of 
small children. 

Note:

 The surface of this device does not contain nickel in the 

platings. The surface of this device contains stainless steel.

Bluetooth wireless technology

Bluetooth wireless technology allows 
you to connect compatible devices 
without cables. The headset and the 
other device do not need to be in line 
of sight, but they should be within 10 
metres (33 feet) of each other. The 
closer the headset and the other 
device are to each other, the better 
the performance. The optimal 
operating range is shown in dark grey 
in the picture. The connection is 
subject to interference from distance and obstructions (shown in light 
grey) or other electronic devices.

The headset is compliant with the Bluetooth Specification 2.1 + EDR 
supporting the following profiles: Headset Profile 1.1, Hands-Free 

<10m

Summary of Contents for BH-905I




















Reviews: