background image

If the ambient temperature falls

below 0°C (32°F) or exceeds 55°C

(131°F), charging stops

temporarily until the

temperature rises to 0°C (32°F) or

falls below 55°C (131°F).

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet.

The fully charged battery has power

for up to 8 hours of talk time or up to

200 hours of standby time.
To check the battery charge when

the headset is not connected to a

charger, press the power key when

the headset is connected to a mobile

device. If the indicator light is green,

the charge level is sufficient. If the

light is yellow, you may need to

recharge the battery soon. If the

light is red, recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the

power key for about 2 seconds. The

headset beeps, and the green

indicator light flashes slowly while

the headset tries to connect to the

last one or two connected devices.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes

slowly. If the headset has not been

paired with a device, it automatically

enters pairing mode.
To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the

headset is not connected to a device

within about 30 minutes, it switches

off automatically.

ENGLISH

Summary of Contents for BH-608














Reviews: