By default, the vibration and the
indicator light are activated. To
deactivate the vibration and the
light, press and hold the answer/end
key and the volume down key for
about 5 seconds when the headset is
connected to a device.
To activate the vibration and the
light, press and hold the answer/end
key and the volume up key for about
5 seconds.
Use the headset with two
connected devices
You can connect the headset to two
devices at the same time.
To pair the headset to a second
device, see
"Pair and connect the
headset"
.
Allow connection to two devices
By default, the headset can only be
connected to one device at a time. To
allow the headset to connect to two
devices, switch off the headset, and
press and hold the power key and
the volume up key for about 5
seconds. The green indicator light
flashes once.
To allow the headset to connect to
only one device, switch off the
headset, and press and hold the
power key and the volume down key
for about 5 seconds. The yellow
indicator light flashes once.
Handle calls
If the headset can connect to two
devices at the same time and you use
redialling or voice dialling, the call is
made on the device that you last
used to make a call when the
headset was connected to it.
To answer a call on the second
connected device and end the active
call on the first device, press the
answer/end key.
To answer a call on the second
connected device and put the active
call on hold on the first device, press
ENGLISH
