manualshive.com logo in svg

Nokia A032, User Manual

Share
Download
Nokia A032 User Manual Download Page 146

140

Nokia A032 Advanced User Guide

Key databases

The Nokia A032 supports two types of key 
database to store personal WEP keys:

•

Local key database – The simplest type of 
key database is a local list which is stored 
inside the access point using flash memory. 
This list can hold up to 200 entries.

•

External key database – This allows you to 
store more than 200 keys in a centralized 
location. The Nokia A032 can access an 
external key database across the LAN.

Local key database

Each access point contains a NID name list (see 

NID name table

 on page 98). This contains up 

to 200 client or bridge entries, consisting of the 
MAC address, WEP key and a user-assigned 
name. 

If the local database is selected and personal 
WEP key operation is activated, each time a 
wireless client attempts to communicate, the 
access point will search for the client’s entry in 
the NID name list and use the corresponding 
WEP key to authenticate the client.

The limitations of the local database are:

•

A maximum of 200 entries.

•

If there are multiple access points, each one 
must be loaded with the same copy of the 
NID name table; any change to one access 
point must be made to all the others.

External key database

Rather than storing the keys on the access 
points, the Nokia A032 offers you the option to 
store them using an 

authentication 

server. The 

authentication server must support the RADIUS 

A032-Adv.book  Page 140  Monday, November 13, 2000  10:47 AM

Summary of Contents for A032



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands