Nokia 9500 MPR User Manual Download Page 161

Page: 161 / 1078

WebEML User Manual

Administer software license

161

20 Administer software license

20.1 Purpose

This chapter provides procedures to view and update the Software License for the
9500 MPR.

20.2 General

In the SW License window the following fields are present:

•

RMU Serial Number

: The Serial Number of the Flash Card is displayed. This is

a read-only field.

•

License String

: The license string stored in the Flash Card is displayed. The

license string displays the set of key features supported by the NE. This is a
read-only field.

•

License Key

: This field is used to upgrade the license string. To upgrade the

license string, copy the code of the new license and click on Apply.

The

Refresh

button activates a new reading of the read-only fields.

See the

9500 MPR Product Information Manual

for more information about license

key management.

Release 7.0.0 3DB 19286 ACAA Issue 01

Summary of Contents for 9500 MPR























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 9500 MPR

Reviews:

Nokia 9500 MPR, User Manual, Page: 161 / 1078

Search results

Summary of Contents for 9500 MPR

Reviews: