Select the
Other
page, and define the settings.
•
Ask before connecting
— If you select
Yes
, a dialog
appears every time you connect to the Internet,
asking you to confirm the connection or to change
the Internet access point.
•
GPRS operating mode
— Select
Always on
to keep
the GPRS connection in alert mode and to switch the
packet data transfer on quickly when needed. If you
select
On when needed
, the device uses a GPRS
connection only when you start an application or
action that needs it. Note that if there is no GPRS
coverage and you selected
Always on
, the device
will periodically try to establish a GPRS connection.
•
To change the priority of Internet access points,
select
Connections
→
Internet setup
. Press
Priority
, select an Internet access point, and press
Move up
or
Move down
. When you establish a
data connection, the access points are searched for
in the order you have specified.
Selecting an Internet access point
When you establish an Internet connection, you are
asked to select the Internet access point you want to
use for that connection. In the
Network connection
dialog, select an Internet access point from the list, and
press
Connect
. Before connecting, you can filter the list
of access points according to the network type. To view
all Internet access points, select
All networks
. To view
Internet access points that are currently available, press
Show available
. For example, if you are using the
Offline
profile, no GPRS or GSM Internet access points
are shown in the list.
Tip:
The
Network connection
dialog opens
only if you have selected
Yes
in the
Ask before
connecting
field in the general Internet access
point settings. To check the status of the
setting, select
Desk
→
Tools
→
Control
panel
, and
Connections
→
Internet setup
→
Other
page.
General
Go to
Desk
→
Tools
→
Control panel
→
General
.
Date and time
You can change the time and date used by applications
such as
Calendar
and
Clock
.
•
To set the current time and date, select
General
→
Date and time
, select the
Time
and
Date
fields,
and enter the numbers. When setting the date, you
can also press
Browse
to open a month grid where
you can select a date.
•
To update date and time automatically, select
General
→
Date and time
. In the
Auto time
update
field, select
On
. The time, date, and time
zone information is updated to your device from
the mobile phone network (network service). If the
time zone changes, the current city also changes in
the
Clock
application, and starting and ending
times of your calendar entries are shown in local
time. For the setting to take effect, the phone needs
to be restarted.
89
Control panel
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Page 89
Jul 2, 2004 11:32:12 AM
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Page 89
Jul 2, 2004 11:32:12 AM
