70
C o n n e c t i v i t y
Bluetooth technology, use Nokia approved enhancements for this model. Check with the
manufacturers of other devices to determine their compatibility with this device.
Features using Bluetooth technology increase the demand on battery power and reduce
the battery life.
Do not accept Bluetooth connections from sources you do not trust.
A Bluetooth connection is disconnected automatically after sending or
receiving data.
Bluetooth connection settings
Select >
Settings
>
Connectivity
>
Bluetooth
.
Bluetooth
— to switch Bluetooth connectivity on or off
My phone's visibility
>
Shown to all
— to allow your device to be found by other
devices with Bluetooth connectivity at all times. To allow your device to be found
for a defined time period, select
Define period
. For security reasons it is advisable
to use the
Hidden
setting whenever possible.
My phone's name
— to define a name for your device
Remote SIM mode
>
On
— to enable another device, for example, a car kit, to use
the SIM card of your device using Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.
Send data
1. Open the application where the item you want to send is saved.
2. Scroll to the item you want to send, and select
Options
>
Send
>
Via Bluetooth
.
3. The device starts to search for devices within range. Paired devices are shown
with
. Some devices may show only the unique device addresses. To find
out the unique address of your device, enter the code
*#2820#
in the standby
mode.
If you have searched for devices earlier, a list of devices found previously is
shown. To start a new search, select
More devices
.
4. Select the device with which you want to connect.