52
©2000 Nokia Mobile Phones. All rights reserved.
To transfer calls
The call transfer is a network service which enables you to connect two calls
together and disconnect yourself from both calls.
1
When you have one call on hold, and another call active or an outgoing
call alerting, press
Transfer
to connect the calls together.
To answer a waiting call
Call waiting is a network service to which you must subscribe before you can
use it. Call waiting is set on in the Telephone settings, see ”Telephone settings”
on page 53.
1
When you receive a new call while you already have an active call, you will
hear a sound and see a note informing you of the new incoming call.
2
Press
Answer
. The previous call will be put on hold.
To send DTMF tones when you have an active call
1
Key in the digits from the communicator keyboard. Each keystroke will
generate a DTMF tone which will be transmitted directly.
Besides the numbers 0 - 9, you can also use the characters
p
,
w
,
*
and
#
when sending DTMF tones. For information on the functions of these
characters, see ”To make contact cards” on page 41.
Or alternatively,
1
Press the Menu button and select
Send DTMF
. The DTMF sequences stored
in the other party’s contact card are shown. For information on how to
store DTMF sequences, see ”To make contact cards” on page 41.
2
Select a DTMF sequence. You can edit the sequence, or, if there are no
stored sequences, you can write a new DTMF sequence into the input field.
3
Press
Send
.
To make alternating calls
An alternating call is made as a voice call, but it changes into a fax call. An
alternating call can be made to a fax box, for example: you initiate the call as
Note:
Calls can be transferred only
if all calls are voice calls, not fax or
data calls, and none of the calls is a
conference call.
Tip:
You cannot access the stored DTMF
sequences during a conference call.
However, you can send DTMF tones
during a conference call by keying in the
digits from the keyboard.
Um_spock3.bk Page 52 Thursday, June 1, 2000 10:11 AM
