Copyright
©
2003 Nokia. All rights reserved.
76
Screen saver
A digital clock screen saver is used for power saving in standby mode. It activates
when no function of the phone has been used for a certain length of time. Press
any key to deactivate the screen saver. The screen saver is also deactivated when
the phone is out of the network coverage area.
Press
Menu
and select
Settings
,
Display settings
, and
Screen saver timeout
. Select
the length of time after which the digital clock display will be activated. The
timeout can vary from 5 seconds to 60 minutes.
Note that the screen saver overrides all graphics and texts that are on the display
in standby mode.
■
Tone settings
Press
Menu
, and select
Settings
and then
Tone settings
. You can find the same
settings in the
Profiles
menu, see
. Note that the settings you
make, change the settings in the active profile.
Select
Incoming call alert
to select how the phone notifies you of an incoming
voice call. The options are
Ringing
,
Ascending
,
Ring once
,
Beep once
and
Off
.
Select
Ringing tone
for incoming voice calls. To select ringing tones that have
been saved in the
Gallery
, select
Open gallery
from the ringing tone list.
Select
Ringing volume
and
Vibrating alert
for incoming voice calls and messages.
The vibrating alert does not work when the phone is connected to a charger, a
desktop stand, or a car kit.