manualshive.com logo in svg

Nokia 7368 ISAM CPE, Product Manual, Page: 88 / 108

Share
Download
Nokia 7368 ISAM CPE Product Manual Download Page 88

Configure a A-020W-A

82

7368 ISAM CPE A-020W-A Product Guide

3FE-47511-AAAA-TCZZA

Issue: 01

 

Table 32

Access control parameters

2

Select a WAN connection from the drop-down menu.

3

Click to enable or disable Trusted Network.

4

Select an access control level for each of the six protocols: ICMP, Telnet, SSH, HTTP, 
TR-069, and HTTPS for both the WAN and the LAN side.

5

Click Save.

6

Optionally, add one or more subnet trusted networks.

The maximum number of entries is 32.

You can also use the Source IP fields to delete a previously created entry for a subnet trusted 
network.

7

STOP. This procedure is complete.

8.1.5

Application configuration

The A-020W-A CPE also supports application configuration, including:

•

port forwarding

•

port triggering

•

DDNS

•

NTP

•

UPnP and DLNA

Field

Description

WAN

Choose a connection from the drop-down menu

Trusted Network Enable

Click to enable or disable

ICMP, Telnet, SSH, HTTP, TR-069, 
HTTPS

Select an access control level for each protocol: 
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny

Source IP Start

Enter a start IP address for the new subnet trusted network

Source IP End

Enter an end IP address for the new subnet trusted network

Release 05.08.01 | June 2018 | Edition 01

Summary of Contents for 7368 ISAM CPE













































































































Reviews:

No comments