9.
Use Phoenix (Testing
→
Display test
→
Lights tab) to verify the calibration by reading the luminance value
for both the reference phone and calibrated phone.
Note:
Remember that the illuminance readings for the reference and calibrated phones must be
done in the same ambient light conditions. If the illuminance values differ more than +- 10%, repeat
the whole ALS calibration procedure.
10. To end the calibration, click Close.
Accelerometer and magnetometer troubleshooting
UI (map) features troubleshooting
RM-424; RM-564
BB Troubleshooting and Manual Tuning Guide
Page 3 –36
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2009 Nokia. All rights reserved.
