Menu fu
nctions
104
Copyright
©
2003 Nokia. All rights reserved.
If you select
Memory
, the security code is requested when the memory in use is
SIM card
and you want to change the memory to
Phone
or
Phone and SIM
or
copy names and numbers from one phone book to another. See also
Memory in
use
Selecting the phone book settings
When you change this setting, the numbers in the menus
Missed calls
,
Received calls
and
Dialled numbers
are deleted.
•
Access codes
to change the security code, PIN code, PIN2 code, barring
password or UPIN code. The codes can only include numbers from 0 to 9.
Restoring factory settings
You can reset some of the menu settings to their original values.
Press
Menu
in standby mode, and select
Settings
and
Restore factory settings
. Key
in the security code and press
OK
. Note that this function does not delete the
information you have saved or downloaded to the phone.
■
Camera (Menu 6)
In this menu, you can start the phone’s camera and adjust its settings.
Note:
Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or when it may cause
interference or danger.
To access this menu:
Press
Menu
in standby mode and select
Camera
.