Nokia 6250 User Manual Download Page 99

Page: 99 / 133

Men

func

ons

Men

func

ons

Total

View materials

You see the costs of used materials in detail by selecting

View materials

The following view with the entered information appears:

Amount

Cost

Total

Each of these views contains information about one entry only.

View comments

You can read any comments written for the current entry. If you select

Options

you can edit given

comments, send them to another phone as a text message .

Send as SMS

With this option you can send history data from the Task journal to another phone as a text message.
The content of data depends on where in the Task journal the sending option was selected.

Transferring Task journal data to a PC using a cable

If you use a cable for transferring Task journal data:

• Connect the DLR-3P cable to the serial port on the back of a compatible PC.

• Connect the DLR-3P cable to your phone.

Start using the Task journal PC-connectivity program available through the Nokia website
(www.nokia.com).

Summary of Contents for 6250




































































































































Search results

Summary of Contents for 6250

Reviews:

Brands by name

Popular brands

Nokia 6250, User Manual

Search results

Summary of Contents for 6250

Reviews:

Brands by name

Popular brands