Nokia 6250 User Manual Download Page 43

Page: 43 / 133

Phone book

Organising the phone book

Editing a name and number

1. Recall the name or number you want to edit and press

Details.

Then press

Options

2. Scroll to

Edit name

Edit number

and press

Select

3. Edit the name or number and press

Erasing a name and number

You can remove names and phone numbers from the selected phone book one by one or all at once.

To erase a name and number

1. Recall the name and number you want to edit and press

Details.

Then press

Options

2. Scroll to

Erase

and press

Select

Note:

If you have stored multiple numbers per name, the option

Erase

deletes the name, all the

numbers and the text notes stored under it.

To erase all names and numbers

1. Press

Names

, scroll to

Erase

and press

Select

2. Scroll to

Erase all

and press

Select

3. Scroll to the phone book you want to erase (

SIM card

Phone

) and press

4. Press

when the text

Are you sure?

is displayed and then key in your security code and press

Summary of Contents for 6250




































































































































Search results

Summary of Contents for 6250

Reviews:

Related manuals for 6250

Brands by name

Popular brands

Nokia 6250, User Manual

Search results

Summary of Contents for 6250

Reviews:

Related manuals for 6250

Brands by name

Popular brands