
73
Copyright ©
2006 Nokia. All rights reserved
.
Select
Menu
>
Settings
>
Configuration
and from the following options:
Default config. settings
— to view the service providers saved in the phone. Scroll to a service provider, and
select
Details
to view the applications that the configuration settings of this service provider support. To set
the configuration settings of the service provider as default settings, select
Options
>
Set as default
. To delete
configuration settings, select
Delete
.
Activ. default in all apps.
— to activate the default configuration settings for supported applications
Preferred access point
— to view the saved access points. Scroll to an access point, and select
Options
>
Details
to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Connect to serv. support
— to download the configuration settings from your service provider if this is
supported by the service provider
Personal config. settings
— to add new personal accounts for various services, and to activate or delete them.
To add a new personal account if you have not added any, select
Add
; otherwise, select
Options
>
Add new
.
Select the service type, and select and enter each of the required parameters. The parameters differ according
to the selected service type. To delete or activate a personal account, scroll to it, and select
Options
>
Delete
or
Activate
.
■
Security
When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may
be possible to the official emergency number programmed into your device.
Select
Menu
>
Settings
>
Security
and from the following options:
PIN code request
and
UPIN code request
— to set the phone to ask for your PIN or UPIN code every time the
phone is switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request
— to select whether the PIN2 code is required when using a phone feature that is protected
by the PIN2 code. Some SIM cards do not allow the code request to be turned off.